Suggested List
Price: $276 Street Price:
$195-$239
Powers Productions Discount
Price: $179
and we can professionally
record your message for this DVA too! |
Viking Electronics DVA-2WA
Digital Announcer/Message On Hold
- The DVA-2WA is a digital announcer / recorder with a built
in 2 watt amplifier. Designed to provide music and Message On
Hold, the DVA-2WA can playback in a continuous loop or alternate
between promotions/paragraphs and an auxiliary music source
at 2 second to 30 minute intervals. Any number of multiple messages
may be recorded up to the 7.5 minutes of on-board record time.
The announcer comes with four professionally pre-recorded "generic"
messages, as well as, power supply and cabling for an easy plug
and play installation.
Because of the built in 2 watt amplifier, the output of the
DVA-2WA may also be connected directly to loudspeakers, with
messages repeated in timed intervals or played at the push of
a button. Examples might include museum displays, information
booths, point of interest locations, point of purchase promotions,
etc.
The DVA-2WA’s non-volatile memory eliminates the need for
batteries or built in tape decks. This provides the convenience
of recording at the shop or professional studio and then shipping
to the installation site.
Applications:
•
On-hold
promotion messages and background-music
•
Non-volatile
message repeater for
Museum and information displays
Car rental "Leave the keys in the
ignition..."
Airport "Loading and unloading
only..."
Smoking "This is a non-smoking
building..."
Amusement Parks "Please keep your
hands in the vehicle at all times..."
...Only Limited by Your Imagination!
Specifications
•
Power:
120V AC/12V DC, 500mA adapter provided
•
Dimensions:
133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
•
Shipping
Weight: Approximately 3 pounds
•
Environmental:
0°C to 32°C (32°F to 90°F) with 5% to 95%
non-condensing humidity
•
Frequency
Response: 100-3.4KHz (phone quality or greater)
•
Sampling
Rate: 64K (equivalent)
•
User Message Length: 7.5
minutes maximum
•
Recording
Audio Input Level: 30mV - 1.0V RMS (AGC range)
•
600
Ohm Audio Output Level: 0.3V RMS maximum
(across a 600 ohm load)
•
Speaker
Output Power: 2 watt peak
•
Connections:
(1) 6-position cage clamp terminal block,
(3) 3mm (1/8") audio jacks, (1)
handset jack
•
Pre-recorded
Pacifier Message Length: 30 seconds total
•
Minimum
Speaker Impedance: 2.66 Ohms: (3) 8-Ohm speaker
Please
allow for standard or express shipping. |
|
|
|
FEATURES
• 7.5
minutes of user recordable memory
• Select
from user recorded messages or four
pre-recorded "generic" on-hold messages
• Three
playback options: on demand, continuous, and timed
intervals
• Non-volatile
memory (no batteries required)
• Built-in
2 watt amplifier to connect directly to speakers
• Record
from electret mic, carbon handset, tape, CD, PC sound
card or any line level device
• 600
ohm audio output for high wattage amplifiers
• Multiple
message capabilities (total number of
messages only limited to maximum record time)
• AGC
(Automatic Gain Control) for trouble free
recording
• Auxiliary
audio (MOH) input for between message background
music
• Remote
trigger input for on-demand playback from a remote
contact closure
• Press
and hold play mode
• Status
LED for record and playback indication
• Master
and auxiliary input volume controls
• I.O.
communications port (allows only one DVA-2WA
to announce at a time with multiple units)
• One
year warranty
• Made
in the USA
Mounting
• Wall
Mountable
• Other
Digital Voice Announcers and Message On Hold players may be
available pre-owned. Please check with us for availability!
702.868.7676 |
|
|
